View PS9213-V-F3_626816.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PHOTOCOUPLER
PS9213
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER
FOR CREEPAGE DISTANCE OF 5.5 mm
DESCRIPTION
The PS9213 is an optically coupled isolator containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9213 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. -NEPOC Series-
FEATURES
* Long creepage distance (5.5 mm MIN.) * High common mode transient immunity (CMH, CML = 15 kV/s MIN.) * High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.) * Maximum propagation delays (tPLH - tPHL = 270 ns TYP.) * Pulse width distortion ( tPHL - tPLH = 270 ns TYP.) * Ordering number of taping product: PS9213-F3, F4: 2 500 pcs/reel * Pb-Free product * Safety standards * UL approved: File No. E72422 * DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (Option)
1 2 5 4 3 1. Anode 2. Cathode 3. GND 4. VO 5. VCC
PIN CONNECTION
(Top View)
TRUTH TABLE APPLICATIONS
* IPM Driver * General purpose inverter
LED ON OFF
Output L H
Document No. PN10535EJ02V0DS (2nd edition) Date Published June 2005 CP(K)
The mark
shows major revised points.
PS9213
PACKAGE DIMENSIONS (UNIT: mm)
5.6 +0.3 -0.1
1.330.2
4.40.25
7.00.2
5.1930.2
2.60.1
2.50.1
0.15 +0.10 -0.05
0.1
1.27
0.40.05 0.25 M
0.50.3
5.830.2
MARKING EXAMPLE
PS9213 NL444
No. 1 pin Mark
Assembly Lot
NL
4 44 Week Assembled Year Assembled (Last 1 Digit)
In-house Code (L:Pb-Free)
Rank Code
2
Data Sheet PN10535EJ02V0DS
PS9213
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification PS9213 PS9213-F3 PS9213-F4 PS9213-V PS9213-V-F3 PS9213-V-F4 PS9213-A PS9213-F3-A PS9213-F4-A PS9213-V-A PS9213-V-F3-A PS9213-V-F4-A 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) approved (Option) Pb-Free 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel Packing Style Safety Standard Approval Standard products (UL approved) Application Part Number PS9213
*1
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter Diode Forward Current
*1
Symbol IF VR VCC VO IO
*2
Ratings 25 5 -0.5 to +35 -0.5 to +35 15 100 2 500 -40 to +100 -55 to +125
Unit mA V V V mA mW Vr.m.s. C C
Reverse Voltage
Detector
Supply Voltage Output Voltage Output Current Power Dissipation
PC BV TA Tstg
Isolation Voltage
*3
Operating Ambient Temperature Storage Temperature
*1 Reduced to 0.33 mA/C at TA = 70C or more. *2 Reduced to 1.9 mW/C at TA = 70C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter High Level Input Current Output Voltage Supply Voltage LED Off Voltage Symbol IFH VO VCC VF MIN. 10 0 4.5 0 15 TYP. MAX. 20 30 30 0.8 Unit mA V V V
Data Sheet PN10535EJ02V0DS
3
PS9213
ELECTRICAL CHARACTERISTICS (TA = -40 to +100C, VCC = 15 V, unless otherwise specified)
Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Detector Low Level Output Voltage High Level Output Current High Level Supply Current Low Level Supply Current Coupled Threshold Input Current (H L) Current Transfer Ratio (IC/IF) Isolation Resistance CTR RI-O IF = 10 mA, VO = 0.6 V VI-O = 1 kVDC, RH = 40 to 60%, TA = 25C Isolation Capacitance Propagation Delay Time (H L)
*2
Symbol VF IR Ct VOL IOH ICCH ICCL IFHL IF = 10 mA VR = 3 V
Conditions
MIN. 1.3
TYP.
*1
MAX. 2.1 200
Unit V
1.65
A
pF
V = 0 V, f = 1 MHz, TA = 25C IF = 10 mA, IOL = 2.4 mA VCC = VO = 30 V, VF = 0.8 V VCC = 30 V, VF = 0.8 V, VO = open VCC = 30 V, IF = 10 mA, VO = open VO = 0.8 V, IO = 0.75 mA
30 0.13 0.01 0.6 0.6 1.5 0.6 50 1.3 1.3 5.0
V
A
mA mA mA
44 10
11
110
%
CI-O tPHL
VI-O = 0 V, f = 1 MHz, TA = 25C IF = 10mA, RL = 20 k, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
1.5 250 500
pF ns
Propagation Delay Time (L H)
*2
tPLH -200
520
750
Maximum Propagation Delays Pulse Width Distortion (PWD)
*2
tPLH-tPHL
270
650
tPHL-tPLH
270
650
Common Mode Transient Immunity at High Level Output
*3
CMH
TA = 25C, IF = 0 mA, VO > 3.0 V, VCM = 1.5 kV, RL = 20 k, CL = 100 pF
15
kV/s
Common Mode Transient Immunity at Low Level Output
*3
CML
TA = 25C, IF = 10 mA, VO < 1.0 V, VCM = 1.5 kV, RL = 20 k, CL = 100 pF
15
kV/s
4
Data Sheet PN10535EJ02V0DS
PS9213
*1 Typical values at TA = 25C. *2 Test circuit for propagation delay time
Pulse input (IF = 10 mA) (PW = 10 s, Duty cycle = 1/10) Input (Monitor) 0.1 F VCC = 15 V RL = 20 k VO (Monitor) CL = 100 pF
VTHHL = 1.5 V
tPHL
tPLH
Input
IF (ON) 50% IF (ON)
15 V Output VTHLH = 2.0 V VOL
47
Remark CL includes probe and stray wiring capacitance. *3 Test circuit for common mode transient immunity
VCM 90%
SW IF 0.1 F B A VCC = 15 V RL = 20 k VO (Monitor) CL = 100 pF
1.5 kV 0V
tr
tf
10%
VO (Switch A: IF = 0 mA) VO (Switch B: IF = 10 mA)
15 V 3.0 V 1.0 V VOL
VCM
Remark CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity.
Data Sheet PN10535EJ02V0DS
5
PS9213
TYPICAL CHARACTERISTICS (TA = 25C unless otherwise specified)
MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE
40 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 150
DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
30
100
20
50
10
0
20
40
60
80
100
0
20
40
60
80
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100 High Level Supply Current ICCH (A), Low Level Supply Current ICCL (A) 1 200 1 000 800
SUPPLY CURRENT vs. AMBIENT TEMPERATURE
VCC = 30 V, VO = Open, ICCH : VF = 0.8 V, ICCL : IF = 10 mA ICCL 600 400 200 0 -50 ICCH
Forward Current IF (mA)
10 TA = +85C +50C +25C 0C -25C
1
0.1
0.01 1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
-25
0
25
50
75
100
Forward Voltage VF (V)
Ambient Temperature TA (C)
THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE
5 Threshold Input Current IFHL (mA) Low Level Output Voltage VOL (V) VCC = 15 V, VO = 0.8 V, IO = 0.75 mA 0.6 0.5 0.4 0.3 0.2 0.1
LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE
VCC = 15 V, IF = 10 mA, IO = 2.4 mA
4
3
2
1
0 -50
-25
0
25
50
75
100
0 -50
-25
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PN10535EJ02V0DS
PS9213
OUTPUT CURRENT vs. AMBIENT TEMPERATURE
1.10 Output Current (Relative Value) IF = 10 mA, 1.05 VO = 0.6 V 1.00 0.95 0.90 0.85 0.80 0.75 0.70 -40 -20 0 20 40 60 80 100
OUTPUT CURRENT vs. FORWARD CURRENT
14 VO = 0.6 V 12 Output Current IO (mA) 10 TA = +25C 8 6 4 2 0 0 5 10 15 20 +100C -40C
Forward Current IF (mA)
Ambient Temperature TA (C)
Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns)
Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns)
PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT
700 VCC = 15 V, 600 CL = 100 pF, RL = 20 k 500 tPLH 400 300 200 100 0 0 5 10 15 20 tPHL
PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. SUPPLY VOLTAGE
1 800 1 600 1 400 1 200 1 000 800 600 400 200 0 -200 0 10 tPLH tPHL tPLH - tPHL 20 30 40 IF = 10 mA, CL = 100 pF, RL = 20 k
tPLH - tPHL
Forward Current IF (mA)
Supply Voltage VCC (V)
PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE
Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL - tPLH (ns) Propagation Delay Time tPHL, tPLH (ns) 700 600 500 400 300 200 100 0 -40 -20 0 20 40 tPHL tPLH 1 600
PROPAGATION DELAY TIME vs. LOAD CAPACITANCE
IF = 10 mA, 1 400 VCC = 15 V, RL = 20 k 1 200 1 000 800 600 400 200 0 0 100 200 300 400 500 tPHL
tPLH
PWD
IF = 10 mA, VCC = 15 V, CL = 100 pF, RL = 20 k 60 80 100
Ambient Temperature TA (C)
Load Capacitance CL (pF)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10535EJ02V0DS
7
PS9213
PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE
IF = 10 mA, VCC = 15 V, 800 CL = 100 pF 600 tPLH - tPHL 400 tPHL 200 0 -200 0 tPLH
Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns)
Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns)
PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE
500 IF = 10 mA, 450 VCC = 5 V, 400 CL = 15 pF 350 300 250 200 150 100 50 0 0 5 10 15 20 25 tPHL tPLH - tPHL tPLH
1 000
10
20
30
40
50
Load Resistance RL (k)
Load Resistance RL (k)
Remark The graphs indicate nominal characteristics.
8
Data Sheet PN10535EJ02V0DS
PS9213
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.00.05 4.00.1
1.750.1
7.40.1
1.5+0.1 -0
3.05 MAX.
1.550.5 8.00.1
5.50.05
12.00.2
6.00.1
2.850.1
0.3
Tape Direction
PS9213-F3 PS9213-F4
Outline and Dimensions (Reel)
2.00.5
2.00.5 13.00.2
R 1.0
21.00.8
13.00.2
3302.0
1001.0
13.51.0 17.51.0
Packing: 2 500 pcs/reel
11.9 to 15.4 Outer edge of flange
Data Sheet PN10535EJ02V0DS
9
PS9213
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.45
0.8
5.5
10
Data Sheet PN10535EJ02V0DS
1.27
PS9213
NOTES ON HANDLING 1. Recommended soldering conditions
(1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s
260C MAX. 220C
to 60 s
180C
120C
12030 s (preheating)
Time (s)
(2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) * Time (each pins) * Flux 350C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C
Data Sheet PN10535EJ02V0DS
11
PS9213
(4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.
12
Data Sheet PN10535EJ02V0DS
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of PS9213-V-F3

	To Download PS9213-V-F3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .